434
COMmander 6000/R/RX - Firmware V7.0D - Advanced Information V19 04/2018
Settings – Public switched tel. networks
ISDN connections
GSM gateway
The S
0
port supports the GSM gateway connected to it. Any phone
numbers can be used for the connection. They must be entered in the PBX
and GSM gateway configurations.
Notes:
When you configure the GSM gateway, you must also input the
connection type of the ISDN connection.
GSM gateways accept external phone calls automatically. This may
cause call charges for the caller, even if no-one picks up the phone at
the internal destination.
If the PBX is not connected to the land line, outgoing external calls can
only be accepted via a targeted exchange line access using the phone
numbers entered on the page
Routing > VoIP/GSM Routing >
Exception numbers
(and the corresponding accesses, also configured
on this page) or via a configured preferred exchange line (
exchange
line settings
for subscribers or groups).
MULTIPLE SUBSCRIBER NUMBERS
Multiple subscriber number (MSN)
The PTMP connection has up to ten multiple subscriber numbers. The
network provider assigns the phone numbers for the connection. (Select
New
to enter.)
