COMmander 6000/R/RX - Firmware V7.0D - Advanced Information V19 04/2018
275
Phoning
Transferring
Blind Transfer (Transferring without Announcement)
If you want to transfer an external communication partner to another internal
subscriber, you do not have to wait until the subscriber being called via the
query call accepts the call; you can hang up the receiver while this call is
being made. The internal subscriber will continue to be called.
Requirements:
•
Internal transfer destination
During a call, proceed as follows.
1. Press the
Flash key
or the
Query key
.
2. Enter the internal number. Possible entries:
Internal number of the individual phone
(for exchange line request
type Direct exchange line phone: with preceding **)
Internal number of the group
(for exchange line request type Direct
exchange line phone: with preceding **)
3. Wait until you hear the ringtone.
4. Hang up the receiver.
Once the called subscriber accepts the call, he is connected to the
external subscriber.
Note:
If the subscriber being called does not accept the call, the call will
be transferred back to your phone 60 seconds later (your phone rings).
If you do not accept the call within 60 seconds the call will be discon-
nected. If your own phone has become busy in the meantime, the
