178
COMmander 6000/R/RX - Firmware V7.0D - Advanced Information V19 04/2018
Functions, Uses, Concepts
System Messages
System Messages
System messages are used to inform administrators and users about
system events such as operating errors. Every event that happens in the
system is logged. E-mails with information about the events can also be sent
out.
The following different types of system event are possible:
•
system information, e.g. automatic memory clean-up and memory
check (Voice Mail/Fax function), switch between configurations, switch
relays on/off, send system e-mails, register in Configuration Manager
•
simple malfunctions, e.g. automatic memory clean-up and memory
check (Voice Mail/Fax function) errors
•
serious malfunctions, e.g. fan fault (only COMmander 6000R/RX:),
alarm temperature exceeded (only COMmander 6000R/RX)
•
security warnings, e.g. failed logon attempts, entries in the IP blacklist,
Admin password change
Proceed as follows to set up system messages:
•
Configure DNS server.
–
Using the Configuration Manager (page
Administration > IP
configuration
•
Configure outgoing mail server.
–
Using the Configuration Manager (page
Administration > E-mail >
Outgoing mail server
)
•
If necessary, set up the language file.
–
Using the Configuration Manager (page
Administration > E-mail >
Internationalisation
)
