COMmander 6000/R/RX - Firmware V7.0D - Advanced Information V19 04/2018
171
Functions, Uses, Concepts
Switch Input
Switch Input
If a device that is suitable as switch input (e. g. a door terminal with door bell
buttons) is connected to the PBX, it can then be used to trigger a door call
or an alarm.
Proceed as follows for configuration:
•
Creating a switch input for an alarm.
–
Using the Configuration Manager (page
Devices > Alarms
)
•
Creating a switch input for a door call.
–
Using the Configuration Manager (page
Devices > Door terminals
)
•
Configuring switch inputs.
–
Using the Configuration Manager (on the following pages)
– Devices > Alarms > Switch input >
)
– Devices > Door terminals > Door terminal calls >
)
