COMmander 6000/R/RX - Firmware V7.0D - Advanced Information V19 04/2018
1031
Settings – Administration
Name
Freely selectable name. This name is used to identify the outgoing mail
server within the PBX and from connected system phones.
Address
Enter the address of the outgoing mail server:
IPv4 address
Four blocks separated by a dot (.).
IPv6 address
Eight blocks separated by a colon (:).
Port
Note:
In the factory settings, the port is set to 25.
Requirements:
•
Knowledge of the access data for the outgoing mail server
Enter the port number of the outgoing mail server between
1
and
65535
. You
can obtain the port number from your e-mail provider or read it up in the
Internet.
