Auerswald COMfortel Voicemail, Instructions Manual

Page: 12 / 44

Preparation
12
Connecting the Headset
Requirements
– A headset corresponding to technical data listed on page 7 .
Note: The system telephone supports the operation of cable-connected
headsets as well as wireless headsets (headsets with a DHSG interface,
for example, from GN and Plantronics).
– To connect a COMfortel headset from Auerswald or another cable-con-
nected headset, you need the following: An adapter
Note: The adapter is available at specialized stores as an Auerswald
accessory.
Steps to Take
1.
Insert the headset plug in the jack labelled with on the underside of the
telephone (see Fig. 3 below).
2.
Guide the cable to the outside through one of the cable channels.
Further Steps
쑱
The headset type used must be configured in the telephone at the end of
commissioning (in the telephone menu under settings
headset head-
set type).
쑱
In order to use the headset for calls, headset operation must be enabled at
the end of commissioning (in the telephone menu under functions
headset).
Fig. 3: COMfortel headset connection