Operation
58
COMfortel M-200/M-300 - Setup and Quick Guide V03 09/2014
3.
Scroll to Find Name and press the Select soft key.
4.
Select the required name and press the Details soft key.
5.
Scroll to the required telephone number and press the Se-
lect soft key.
6.
Scroll to Add to speed dial and press the Select soft key.
7.
Scroll to the item you require 0 to 9 and press the Add name
soft key.
Setting up alarm key
(only COMfortel M-300)
Requirements
–
Contact configured in the internal telephone book
1.
Press the Menu soft key to open the main menu.
2.
Scroll to the Phone Book and press the Select soft key.
3.
Scroll to Add to speed dial and press the Select soft key.
4.
Scroll to the position A and press the Add name soft key.
5.
Select the required name and press the OK soft key.
Call Forward Unconditional (CFU)
Requirements
–
Controlling of the PBX via telephone authorisation
assigned in the PBX
Switching on CFU
1.
To switch on the follow me function, press *21*, enter the
destination number, and then press #.
2.
Press
to switch on the follow me function. A message ap-
pears in the display and you hear an audio signal to confirm
that you have switched on the function.
3.
Press
to exit this screen.
Note: You can change the *21* sequence in the DECT server.
Switching off CFU
1.
To switch off the follow me function, press #21#, and then
press .
Summary of Contents for COMfortel M-200
Page 2: ......
Page 70: ...Index 70 COMfortel M 200 M 300 Setup and Quick Guide V03 09 2014 ...
Page 71: ......
