Auerswald COMfortel 600, Operation Manual Setup And Operation, Page: 49 / 84

Preparation
COMfortel 600 - Setup and Operation V01 06/2014
49
Connecting a Headset
Requirements
– A wired headset corresponding to the technical data listed on page 42 .
1.
Insert the headset connector into the socket labelled with on the lower
side of the telephone.
2.
Guide the cable to the outside using the corresponding cable channel.
Important Information on the Location of the Telephone
Requirements
– Existing connections in the immediate vicinity of where the telephone is
placed:
쐽
Analogue socket connected to the PBX or provided by the network pro-
vider
Warning: Liquid entering the casing can cause life-threatening electric
shocks and damage or destroy the telephone.
Only operate the telephone in closed, dry rooms.
Only clean the casing of the device with a slightly moist cloth or an anti-
static cloth.
Caution: Mechanical stress and electro-magnetic fields can result in dam-
age to or destruction of the device or impairment of its functions.
Avoid mechanical loads (e.g. vibrations).
Avoid the proximity of devices which radiate electro-magnetic fields (for
example, radio sets, professional radio equipment, amateur radio
equipment, mobile phones, DECT systems, WLAN routers, etc.).
Do not expose the device to direct sunlight.
Protect the device from dirt, excessive dust, condensation, caustic
liquids, and steam.
Note the values for ambient temperature and humidity given in the tech-
nical data.