Auerswald COMfortel 3500, Commissioning Instructions

Page: 47 / 76

Preparation
COMfortel 3500 - Firmware Version 1.2B - Commissioning Instructions 02 07/12
47
– To connect a COMfortel headset from Auerswald or another cable-con-
nected headset, you require: an adapter.
Note: The adapter is available at specialized stores as an Auerswald
accessory.
Steps to Take
1.
Insert the headset connector into the jack labelled with on the lower
side of the telephone.
2.
Guide the cable to the outside using the corresponding cable channel.
Further Steps
쑱
In order to use the headset for calls, headset operation must be enabled at
the end of commissioning (under Functions > Headset).
Assembling the Telephone
Requirements
– Existing connections in the immediate vicinity of where the telephone is
placed:
쐽
Output socket on the DSL router or an existing network mains outlet
쐽
For power supply via power plug: 230 V network mains outlet
Warning: Liquid entering the casing can cause life-threatening electric
shocks and damage or destroy the telephone.
씮
Only operate the telephone in closed, dry rooms.
Attention: Mechanical stress and electro-magnetic fields can result in the
damage or destruction of the device or impairment of its functions.
씮
Avoid mechanical loads (e.g. vibrations).
씮
Avoid the proximity of devices which radiate electro-magnetic fields (for
example, radio sets, professional radio equipment, amateur radio
equipment, mobile phones, DECT systems, WLAN routers, etc.).
씮
Do not expose the device to direct sunlight.
씮
Protect the device from dirt, excessive dust, condensation, caustic liq-
uids, and steam.
씮
Note the values for ambient temperature and humidity given in the tech-
nical data.