Auerswald COMfortel 1500 User Manual Download Page 36

Page: 36 / 236

Introduction

Display-driven Usage of the Telephone

Selection List* in the Settings Menu:

– Synchronization

– Answering machine
– Backup

– User settings

– Display
– Default settings

– Lists

– Signalling
– Blocking

Pic. 13: Settings Menu

Selection List* for Def. settings:

– Headset type (

page 158

)

– Language (

page 157

)

– MSN (

page 157

)

– VMC461.2 FW >= 2.02 (

page 158

)

– additional **

Selection List* for Lists:

– Caller list (

page 173

)

– Calls list (

page 173

)

– Phone book (

– Redial list (

– additional **

Selection List* for Signalling:

– Attention tone (

page 168

)

– Call waiting tone (

page 168

)

– Headset ringer (

page 169

)

– Message LED (

page 167

)

– Ringer melody (

page 170

)

– Ringer volume (

page 170

)

– additional **

Selection List* for Display:

– Date format (

– Display light (

– Time format (

– Brightness max. (

– Brightness min. (

– Contrast (

)

– additional **

Selection List* for Blocking:

– User PIN (

– Function lock (

– Settings lock (

– additional **

* Scroll to the requested selection with the

softkeys and press the softkey to select the function.

To scroll back to the previous menu level, press the

softkey.

To return to the idle state, press the exit key. Besides this the telephone automatically switches back to the idle
state if no key has been pressed for 30 seconds.

** The functions available in the selection list can be blocked against unauthorized use (

page 165

). The release or dis-

play of these blocked functions in the selection list requires to enter of the corresponding PIN after selecting “addi-
tional” (see also

Pic. 11 on page 34

). The release stays active during the now following settings and will be re-

blocked again after 60 seconds without pressing a key or by pressing the selection “logout” in the menu “settings

왘

blocking

왘

additional”. Additionally in this menu it is possible to check and change the now existing releases.

Summary of Contents for COMfortel 1500













































































































































































































































Search results

Summary of Contents for COMfortel 1500

Reviews:

Related manuals for COMfortel 1500

Brands by name

Popular brands

Auerswald COMfortel 1500, User Manual

Search results

Summary of Contents for COMfortel 1500

Reviews:

Related manuals for COMfortel 1500

Brands by name

Popular brands