Auerswald COMfortel 1500 User Manual Download Page 30

Page: 30 / 236

Introduction

Display-driven Usage of the Telephone

Entry (Digits/Characters)

Move the cursor to the left.

Move the cursor to the right.

Delete the last character in front of the cursor.
Holding the key (2 sec.) deletes the whole
entry.

Accept the entry.

Switch to large characters for the next char-
acter during character entry. Then switch
back to small characters.

Switch to large characters during charac-
ter entry.

Switch to small characters during charac-
ter entry.

Confirmation

“Yes” as an answer to a question.
Or: Confirm display of a change to return to
the idle state.

“No” as an answer to a question.

Selection

Select and accept the function near the icon
in text form (currently not activated).

Select and accept the function near the
icon in text form (currently activated).

Accept changes (activation of the check
boxes).

Activate check box (currently not acti-
vated).

Deactivate check box (currently acti-
vated).

Blocks

Change the block for the function nearby
(currently no block).

Change the block for the function nearby
(currently blocked for guests).

Change the block for the function nearby
(currently blocked for guests and users).

Change the block for the function nearby
(currently blocked for guests, users and
SubAdministrator).

Table 2: Icons in the Display

Summary of Contents for COMfortel 1500













































































































































































































































Search results

Summary of Contents for COMfortel 1500

Reviews:

Related manuals for COMfortel 1500

Brands by name

Popular brands

Auerswald COMfortel 1500, User Manual

Search results

Summary of Contents for COMfortel 1500

Reviews:

Related manuals for COMfortel 1500

Brands by name

Popular brands