Auerswald COMfortel 1500, User Manual

Page: 183 / 236

Service Functions
Return to the Default Factory Settings
183
Return to the Default Factory Settings
If necessary, you can reset up your telephone to the default factory setting.
If you get the display message “function not possible” after selecting of the function, the tel-
ephone has not the necessary authorization level. To switch to the level, press the menu key,
e.g. select the menu “functions” and then “additional” (see also
page 34 ). After selection of
the authorization level and following entry of the corresponding PIN, you can restart the func-
tion “return to the default factory settings” as described here.
When operated on the PBX systems COMpact 5010 VoIP, COMpact 5020 VoIP, COM-
mander Basic.2 or COMmander Business the PINs remain because the PINs of the PBX are
used. When operated on the other PBX systems the user PIN will be deleted.
Press the menu key.
N
Enter #201 via keypad.
On the display appears a con-
firmation message.
Press the softkey to confirm the message.
The telephone is reset to the
default factory settings. Then
the language has to be selected
again and the internal telephone
number of the telephone MSN)
has to be entered.
Use the and softkeys to browse to the
option you require and press the softkey to
the left of the option:
앫
[language]: Selects one of the offered lan-
guages as display language.
...
N
internal number
Enter the internal number.
Press the softkey to complete the entry.
[ ]
☞
Advice