Auerswald COMfortel 1500, User Manual

Page: 18 / 236

Introduction
First Use of the Telephone
18
8. Insert the Western Modular plug of the wall-mount power supply COMfortel XT-PS into
the jack marked with
on the bottom side of the telephone (remove the bridge plug
from the jack first). Wait with the connection to the 230 V power supply until the first
operation starts.
9. Put the cables into the existing cable channels and empty spaces in such a manner that
the cables will not sink and may cause that the telephone wobbles.
10. Turn the telephone around again.
Connect the Headset
The COMfortel 2500 supports the operation of cable connected headsets as well as wireless
headsets (Headsets with a DHSG interface e.g. by GN Netcom or Plantronics). The headset
type in use has to be configured in the telephone (
chapter Select Type of Headset on
page 158 ).
To connect the COMfortel Headset by Auerswald or other cable connected headsets to the
DHSG interface an adapter is necessary that is available as an Auerswald accessory at an
authorized dealer.
The COMfortel 1500 supports the operation of cable connected headsets. In this case the
connection is made instead of the receiver at the receiver jack
. When connecting the
COMfortel Headset by Auerswald an adapter is necessary that is available as an Auerswald
accessory at an authorized dealer.
Technical data for the connection of a headset can be found on page 187 .
Pic. 3: Connection and Mounting of the Key Extension
COMfortel Xtension30
☞
Advice