657
COMfortel 1400 IP/2600 IP/3600 IP - Firmware V2.6 - Operation/Configuration - V05 09/2016
Service and Maintenance
Update and Provisioning
If no firmware file is available on the update server, a warning message is
displayed to tell you that no new firmware is available.
If the telephone's update settings are incorrect, a warning message is
displayed to tell you that the check for new firmware was unsuccessful.
If the update settings of the telephone are correct and a firmware file is
available on the update server, the new firmware is installed. The telephone
is restarted, and the login window opens.
Notes:
To restart the telephone at a later point in time, tap on
Cancel
and then,
under
Settings > System > Update & provisioning > Reboot
, tap on
Reboot
when you want to restart the telephone.
After a firmware update you usually require a new version of the instruc-
tions. You will find up-to-date instructions on the Internet (see
).
In order to use the new features after the telephone's firmware has been
updated, you often may need to update the PBX firmware (see PBX
operation instructions).
Distributing firmware
A new version of the firmware can be distributed from one system telephone
to other system telephones connected to the PBX.
Requirements:
•
Enabled
Distributing firmware
check box