563
COMfortel 1400 IP/2600 IP/3600 IP - Firmware V2.6 - Operation/Configuration - V05 09/2016
Settings
Sounds
Calls will be signalled acoustically by a ringtone. This function
differs from the PBX function do-not-disturb insofar that calls are still
admitted but they will not be signalled acoustically but visually.
Function Key for the Ringtone
Press the key to switch the ringtone on or off or to change it.
Press the key during an incoming call to switch the ringtone on or off for this
call or toggle.
In addition, when functions are assigned on the first key level, the status of
the function is indicated by the corresponding LED.
Proceed as follows by assigning the function key:
•
Using the Configuration Manager by selecting
Ringtone
•
Using the telephone by selecting
Ringtone
Note:
For further information about the general procedures when
assigning function keys, see
LED signalling on the key:
off
The ringtone is enabled.
red
The ringtone is disabled.