COMfortel 1400 IP/2600 IP/3600 IP - Firmware V2.6 - Operation/Configuration - V05 09/2016
224
Functions
Do-Not-Disturb
Proceed as follows:
•
Using the telephone (function key or
> Functions > Do-not-
disturb
)
1. If you enabled the do-not-disturb function, in the
Reject callers
list field,
select one of the following options:
reject all callers
: When do-not-disturb is switched on, all incoming calls
will be rejected.
reject anonymous
: When do-not-disturb is switched on, all anonymous
calls will be rejected.
reject if not in contacts
: When do-not-disturb is switched on all calls
are rejected except for calls from contacts listed in the telephone book.
Note:
The options
reject anonymous
and
reject if not in contacts
could be overridden by the PBX if the telephone is system telephone on
a PBX that has a firmware version as of 6.6. Therefore, these options
cannot be used in system telephone operation.
2. Tap on
Execute
.
Function Key for Do-Not-Disturb
Press the key to switch do-not-disturb on or off or to toggle.
In addition, when functions are assigned on the first key level, the status of
the function is indicated by the corresponding LED.