COMfortel 1100 - Firmware Version 4.4 - COMfortel Set V2.7 - Version of the Manual 04 11/10
89
Telephone Book and Telephone Number Lists
Caller List
Dialling from Caller List
Dialling from Caller List
Dialling can be carried out as follows:
• Via the telephone menu
Requirements:
– Knowledge of the telephone and its menu options and the required PIN, if necessary
1.
Open the caller list.
The last incoming call is displayed.
2.
Scroll to the desired entry or press the message key several times.
3.
Pick up the receiver or press the hook key.
The subscriber is called.
Note:
If you would like to exit the menu without dialling the telephone number
displayed, press the exit key.
As soon as a connection (incoming or outgoing) has been established with
the caller, the telephone number in question is deleted from the caller list.
Only when operated on the PBXs COMpact 5010 VoIP, COMpact 5020 VoIP,
COMmander Basic.2 and COMmander Business: If this is a group called,
the telephone number is also deleted from the caller lists of the other
members of the group. (Can be configured using the configuration manager
on the PBX. Group-wide deletion does not occur if the person calling back
has already deleted his caller list or has been called again by the same caller
on his subscriber telephone number.)
Summary of Contents for COMfortel 1100
Page 273: ...04 11 10...