Auerswald COMfortel 1100 Operation And Configuration Instructions Download Page 74 | Manualshive

Page: 74 / 273

Auerswald COMfortel 1100 Operation And Configuration Instructions Download Page 74

74

COMfortel 1100 - Firmware Version 4.4 - COMfortel Set V2.7 - Version of the Manual 04 11/10

Telephoning
Loudspeaker Listening
Switching on Loudspeaker Listening during a Call

Loudspeaker Listening

During loudspeaker listening, the receiver loudspeaker as well as the loudspeaker in the device
are switched on. This allows other people in the room to listen in on the call. The call is
continued using the receiver microphone (no hands-free calling).

Switching on Loudspeaker Listening during a Call

Requirements:
– Knowledge of the telephone and its menu options

During a normal call using the receiver, proceed as described in the following.

• Press the loudspeaker key.

You are conducting a call in loudspeaker listening mode. The following symbol is
shown in the display:

Switching off Loudspeaker Listening and Returning to Normal Calling

Requirements:
– Knowledge of the telephone and its menu options

During loudspeaker listening mode, proceed as described in the following.

• Press the loudspeaker key.

You are conducting a normal call.

«
...
72
73
74
75
76
...
»

Summary of Contents for COMfortel 1100


















































































































































































































































































Reviews:

No comments