36
COMfortel 1100 - Firmware Version 4.4 - COMfortel Set V2.7 - Version of the Manual 04 11/10
Using the Configuration Software COMfortel Set
Configuration Software COMfortel Set
Operating Instructions for COMfortel Set
Navigation in COMfortel Set
After opening a configuration, the current areas are displayed in a directory tree. To show the
organisation of the topics clearly, most topics have been consolidated under a main topic.
Double-click the desired main topic or the plus sign next to the main topic to open the under-
lying list of topics. Then click the topic you want.
The topic you have chosen opens on the page to the right.
You can select sub-topics directly on some pages by clicking tabs.
Entry and Selection Fields
Note: The menu bar is not required for processing the page. All entries and
changes are made using the mouse or keyboard directly in the pages.
An empty field normally indicates that a name or number is to be
entered. Click within the field in question and use the keyboard to enter a
number or desired text.
In order to change an existing entry, double-click the entry to be
overwritten. The field then becomes blue and can either be overwritten
directly or the existing text can be deleted using the delete/backspace
key.
For functions that offer more than just being switched on and off but only
have a few options to choose from, the field already contains a default
setting. To change this, click the opened list field to make a selection.
• If this is a single field with an arrow pointing downward, open the list
field by clicking the field.
• If there are multiple fields in a table column (without an arrow pointing
downward), open the list field by double-clicking the field.
For some functions, a small circular button (radio button) is located next
to the setting options listed. The selected setting is indicated by a black
dot inside the circle. The setting is changed by clicking an empty circle.
Selecting this setting option simultaneously deactivates any other
previous selection.
A square check box indicates a switching function. An empty check box
means "off" and "no"; a check mark on the other hand, means "on" and
"yes". The switchover is done by simply clicking the box.
Summary of Contents for COMfortel 1100
Page 273: ...04 11 10...