manualshive.com logo in svg

Auerswald COMfortel 1100, Operation And Configuration Instructions, Page: 27 / 273

Share
Download
Auerswald COMfortel 1100 Operation And Configuration Instructions Download Page 27

COMfortel 1100 - Firmware Version 4.4 - COMfortel Set V2.7 - Version of the Manual 04 11/10

27

Using the Configuration Software COMfortel Set
Configuration Software COMfortel Set
Minimum Requirements for PC for Using Configuration Software COMfortel Set

Configuration Software COMfortel Set

The configuration software COMfortel Set lets you easily set up the system telephone on your 
computer. The configuration software is contained on the Auerswald Mega Disk contained in 
the package.

Minimum Requirements for PC for Using Configuration Software COMfortel Set

The computer must meet the following requirements:

• PC with Intel Pentium 800 MHz or compatible processor

• Windows 2000 (as of Service Pack 4), Windows XP (as of Service Pack 3), Windows Vista 

32/64-bit (as of Service Pack 2), Windows 7 32/64-bit, Mac OS X (as of 10.5), Linux (as of 
Kernel 2.6)

• Memory (RAM: 256 MB, recommended 512 MB; for Windows Vista/Windows 7: 512 MB, 

recommended 1 GB

• 37 MB free hard disk space for COMfortel Set

• 85 MB free hard disk space for Java Runtime

• USB interface (if will be used): USB specification 1.1 or 2.0

• CD-ROM drive

• Mouse or compatible pointing device

• SVGA graphics card with a resolution of 800 x 600, recommended 1024 x 768, and 65536 

colours (16 bit)

Installing COMfortel Set

Requirements:
– The Auerswald Mega Disk contained in the package 

1.

Insert the CD (Auerswald Mega Disk) into the CD-ROM drive.

Summary of Contents for COMfortel 1100


















































































































































































































































































Reviews:

No comments