manualshive.com logo in svg

Auerswald COMfortel 1100, Operation And Configuration Instructions, Page: 256 / 273

Share
Download
Auerswald COMfortel 1100 Operation And Configuration Instructions Download Page 256

256

COMfortel 1100 -  COMfortel Set V2.7 -  COMfortel Set V2.7 - Version of the Manual 04 11/10

Glossary
Terminology and Functions
G

Firmware Update

When firmware is updated, errors are corrected and new features are installed. To do this, the 
device establishes a connection to a server in order to download the most current firmware (the 
device settings remain intact). Except for the charges for the required server connection, the 
update is free of charge.

G

Group Functions

In addition to internal subscribers, the PBX can also manage groups. The internal subscribers 
can become members of any and all groups. These groups can be used, for example, to collect 
the internal subscribers in certain departments or teams (Support, Marketing, Sales) together.

Membership in a group does not necessarily mean that a subscriber receives calls sent to the 
group. A subscriber that is logged out takes on no group functions. This can be especially 
important for employees of a support department, who should not be available to customers 
around the clock, but rather rotate in and out of the hotline.

H

Hands-free Calling

During hands-free calling, the loudspeaker and microphone on the device are switched on. This 
option allows you to talk on the telephone even if you have no hands free. In addition, other 
people in the room can participate in the call.

Headset Calls

A headset enables you to participate in calls when you have no hands free. This is a very useful 
feature, especially in certain professional areas (for example, in a call center).

Summary of Contents for COMfortel 1100


















































































































































































































































































Reviews:

No comments