Auerswald COMfortel 1100 Operation And Configuration Instructions Download Page 248

Page: 248 / 273

248

COMfortel 1100 - Firmware Version 4.4 - COMfortel Set V2.7 - Version of the Manual 04 11/10

Service and Maintenance
Initiating PBX Synchronisation
Saving Data Backups on PC to Telephone

Initiating PBX Synchronisation

If necessary, you can initiate a complete data synchronisation with the PBX.

Initiation can be carried out as follows:

• Via the telephone menu

Requirements:
– Knowledge of the telephone, its menu options and the required PIN, if necessary

• Press the menu key and open the menu sync. with PBX.

Data synchronisation is performed with the PBX.

Summary of Contents for COMfortel 1100


















































































































































































































































































Search results

Summary of Contents for COMfortel 1100

Reviews:

Auerswald COMfortel 1100, Operation And Configuration Instructions, Page: 248 / 273

Search results

Summary of Contents for COMfortel 1100

Reviews: