manualshive.com logo in svg

Auerswald COMfortel 1100, Operation And Configuration Instructions, Page: 239 / 273

Share
Download
Auerswald COMfortel 1100 Operation And Configuration Instructions Download Page 239

COMfortel 1100 -  COMfortel Set V2.7 -  COMfortel Set V2.7 - Version of the Manual 04 11/10

239

Service and Maintenance
Firmware Update
Firmware Update Variants

Firmware Update

When firmware is updated, errors are corrected and new features are installed. To do this, the 
device establishes a connection to a server in order to download the most current firmware (the 
device settings remain intact). Except for the charges for the required server connection, the 
update is free of charge.

Firmware Update Variants

There are various options for carrying out a firmware update. The variants are differentiated as 
follows:

Manual Firmware Update

When a manual firmware update is carried out, a file (*.rom) is uploaded into the telephone via 
COMfortel Set thereby saving the new firmware in the telephone.

Instant Firmware Update via the Update Server

When an instant firmware update is activated via the update server, the firmware update is 
initiated automatically. After a connection to the update server has been established, the server 
sends the latest firmware to telephone.

Initiating Manual Firmware Update

Initiation can be carried out as follows:

• Via COMfortel Set

Requirements:
– An existing PC connection configured correctly in COMfortel Set to a PC interface on the 

PBX or another connected system telephone

– Knowledge of the required PIN
– The firmware file saved on the hard drive (*.rom)

Summary of Contents for COMfortel 1100


















































































































































































































































































Reviews:

No comments