COMfortel 1100 - Firmware Version 4.4 - COMfortel Set V2.7 - Version of the Manual 04 11/10
211
Configuring and Operating Functions
Targeted Exchange Line Access
Configuring and Operating Function Key for Targeted Exchange Line Access (C)
Configuring and Operating Function Key for Targeted Exchange Line Access (C)
Important: Only available for operation on the PBXs COMpact 2204 USB,
COMpact 2206 USB, COMpact 4406 DSL, COMpact 4410 USB and
COMmander Basic.
Press the key to initiate targeted exchange line access. This allows you to immediately dial the
external telephone number (with an exchange line access number).
In addition, when functions are defined on the first key level, the status of the function is
indicated by the corresponding LED.
The configuration can be carried out as follows:
• Via COMfortel Set
Configuring Function Key for Targeted Exchange Line Access (C) via COMfortel Set
Requirements:
– An open configuration and the required PIN, if necessary
1.
Open the page Function keys > Assign function keys.
2.
Click one of the following tabs:
3.
Right-click the function key you want to assign.
A function selection dialogue opens.
4.
Select the Exchange line MSN function.
The current settings for defining the key are displayed.
LED signalling next to the key:
Green
The MSN on the key is transmitted during the next outgoing external call.
Off
The standard telephone number transmitted during the next outgoing call.
Level 1: Keys are defined on the first key level.
Level 2: Keys are defined on the second key level.
Summary of Contents for COMfortel 1100
Page 273: ...04 11 10...