COMfortel 1100 - Firmware Version 4.4 - COMfortel Set V2.7 - Version of the Manual 04 11/10
207
Configuring and Operating Functions
Targeted Exchange Line Access
Initiating Targeted Exchange Line Access
Initiating Targeted Exchange Line Access
Initiation can be carried out as follows:
• Via the telephone menu
Requirements:
– Knowledge of the telephone, its menu options and the required PIN, if necessary
– A function key configured for targeted exchange line access
– For targeted exchange line access with the transmission of a specific MSN: Telephone
number transmission activated
1.
Press a function key configured for targeted exchange line access.
2.
Dial a telephone number without an exchange line access number.
Important: For targeted exchange line access with the transmission of a
specific MSN, select an external telephone number with an exchange line
access number.
3.
Pick up the receiver or press the hook key.
The subscriber is called.
Note: If another call comes through before you have finished placing the call,
the telephone will reject the targeted exchange line access for your next call.
Configuring and Operating Function Key for Targeted Exchange Line Access (A)
Important: Only available for operation on the PBXs COMpact 3000,
COMpact 5010 VoIP, COMpact 5020 VoIP, COMmander Basic.2 and
COMmander Business.
Press the key to initiate targeted exchange line access. This allows you to immediately dial the
external phone number (with an exchange line access number).
Summary of Contents for COMfortel 1100
Page 273: ...04 11 10...