COMfortel 1100 - Firmware Version 4.4 - COMfortel Set V2.7 - Version of the Manual 04 11/10
191
Configuring and Operating Functions
Power Save Mode
Configuring and Operating Function Key for Manually Activating Power Save Mode
Configuring and Operating Function Key for Manually Activating Power Save
Mode
Pressing the key while in the telephone's idle state switches it immediately into power save
mode.
The configuration can be carried out as follows:
• Via COMfortel Set
Configuring Function Key for Manually Activating Power Save Mode via COMfortel Set
Requirements:
– An open configuration and the required PIN, if necessary
1.
Open the page Function keys > Assign function keys.
2.
Click one of the following tabs:
3.
Right-click the function key you want to assign.
A function selection dialogue opens.
4.
Select the Power save mode function.
The current settings for defining the key are displayed.
5.
In the Key name entry field, enter a name for the key. The following entries are
possible:
Clicking
automatically enters the default name in the entry field.
Note: The key name is used for printing the label.
LED signalling next to the key:
None
Level 1: Keys are defined on the first key level.
Level 2: Keys are defined on the second key level.
Up to 16 digits
Digits and characters
Summary of Contents for COMfortel 1100
Page 273: ...04 11 10...