COMfortel 1100 - Firmware Version 4.4 - COMfortel Set V2.7 - Version of the Manual 04 11/10
187
Configuring and Operating Functions
Pickup
Configuring and Operating Function Key for Pickup
If you are already taking a call and an internal telephone rings in your proximity, proceed as
described in the following.
1.
Select pickup.
2.
Press the
softkey.
You will hear the internal dial tone. The person you had been talking to hears the hold
music.
3.
Enter the internal phone number of the telephone that is ringing. (In case of direct
exchange access you do not have to dial ** first.)
Note: If you would like to take call that is directed to a group, select the pickup
for the group telephone number.
Once you have finished dialling the phone number, you are connected to the caller.
Configuring and Operating Function Key for Pickup
Pressing the key opens the pickup menu. This allows you to enter the internal phone number
of the telephone that is ringing.
In addition, you can press the key to initiate a call take-over on telephones or answering
machines for which permission has been given (see the PBX manual).
Note: If you often take pickups for specific telephones, you can configure a
speed dialling key for the associated internal subscriber/group telephone as
an alternative to this key. You then see a red blinking LED indicating that the
phone number is being called. You can press the speed dialling key and after
the confirmation, take the call on your telephone.
The configuration can be carried out as follows:
• Via COMfortel Set
LED signalling next to the key:
None
Summary of Contents for COMfortel 1100
Page 273: ...04 11 10...