COMfortel 1100 - Firmware Version 4.4 - COMfortel Set V2.7 - Version of the Manual 04 11/10
171
Configuring and Operating Functions
InterCom Announcement/Handsfree
InterCom Handsfree Procedure
InterCom Handsfree Procedure
InterCom handsfree is carried out as follows:
• A system telephone is called using InterCom handsfree.
• After a few rings, the system telephone automatically picks up the call.
• Hands-free calling is executed.
Note: Hands-free calling is limited to 120 seconds due to security reasons in
order to prevent possible misuse of this function (for example, eavesdropping
from remote rooms).
• After 120 seconds has elapsed, the connection is automatically interrupted unless the
system telephone receiver is picked up during this time.
Executing InterCom Handsfree
Requirements:
– Existing InterCom authorisation at the InterCom destination
– Configured function key for InterCom handsfree
Note: InterCom handsfree can also be executed from any internal telephone
(see the PBX manual).
Depending on the kind of action configured on the key, proceed as described.
1.
Press the function key for InterCom handsfree or press and hold the function key.
The LED next to the function key lights up in green to indicate the existing call
connection.
2.
To end handsfree function, press the function key again or release the function key.
Summary of Contents for COMfortel 1100
Page 273: ...04 11 10...