Auerswald COMfortel 1100, Operation And Configuration Instructions, Page: 162 / 273

162
COMfortel 1100 - Firmware Version 4.4 - COMfortel Set V2.7 - Version of the Manual 04 11/10
Configuring and Operating Functions
Hotel Function
Configuring the Hotel Function
described for normal telephones. With one exception: A function key assigned to the hotel room
function enables the guest to set a wake-up time as well as query his call charges and his
check-in time.
The following functions are still possible:
• Making and excepting internal and external calls
• Deleting data and call charges using the Functions menu command (this does not affect
the call charge counter on the PBX)
• The use of the caller/call/redial list as well as of the telephone book (parts of the telephone
book can be blocked in the telephone)
• Scheduled call/reminders and power dialling
• Call charge query and wake-up time configuration using a function key
Print function
This print function enables a printout of the guest's call charges up to that point as an invoice
(or interim invoice) including an itemised list of the individual calls. This function is controlled
by the hotel reception telephone.
Note: The recommended printers are listed in the manual for the PBX in
question.
Configuring the Hotel Function
Important: Only available for operation on the PBXs COMpact 4406 DSL,
COMpact 4410 USB, COMmander Basic, COMpact 5020 VoIP, COMmander
Basic.2 and COMmander Business.
The hotel function is configured as described in the following.
• For operation on the PBXs COMpact 5020 VoIP, COMmander Basic.2 and
COMmander Business: Use the configuration manager on the PBX to activate the
hotel function.