Auerswald COMfortel 1100, Operation And Configuration Instructions, Page: 155 / 273

COMfortel 1100 - Firmware Version 4.4 - COMfortel Set V2.7 - Version of the Manual 04 11/10
155
Configuring and Operating Functions
Group Functions
Configuring and Operating Function Key for Group Function
Note: If a subscriber logs into different groups as "outgoing" one after the
other, he will only remain logged in as "outgoing" in the group that he logged
into last.
Incoming and outgoing
When logging into a group as "incoming and outgoing", the subscriber then finds himself in the
call distribution of the group in question for internal, exchange line and door calls and also
acquires a number of additional characteristics/access rights from the group. These replace his
own characteristics/permissions as an individual subscriber for outgoing work-related calls.
Note: If a subscriber logs into more than one group as "incoming and
outgoing", he will only remain logged in as "incoming and outgoing" in the
group that he logged into last. And in all other groups, he is then only "logged
in as incoming".
Configuring and Operating Function Key for Group Function
Press the key to execute the action configured in the key for the specified group.
In addition, when functions are defined on the first key level, the status of the function is
indicated by the corresponding LED.
LED signalling next to the key:
Green The telephone is logged into the group for incoming and outgoing calls.
Yellow The telephone is only logged into the group for either incoming or outgoing
calls.
Off The telephone is logged out of the group.
LED signalling next to the key (when defined with a specific group function only
incoming):
Green The telephone is logged into the group for incoming and outgoing calls.
Yellow The telephone is only logged into the group for incoming calls.
Off The telephone is logged out of the group for incoming calls.