152
COMfortel 1100 - Firmware Version 4.4 - COMfortel Set V2.7 - Version of the Manual 04 11/10
Configuring and Operating Functions
Exchange Line Transfer
Configuring and Operating Function Key for Exchange Line Transfer
Configuring and Operating Function Key for Exchange Line Transfer
Important: Only available for operation on the PBXs COMpact 3000,
COMpact 5010 VoIP, COMpact 5020 VoIP, COMmander Basic.2 and
COMmander Business.
Press the key during an internal call to transfer the exchange line access to your communi-
cation partner for a single external call. Afterwards, a confirmation tone is issued on both
internal telephones and the internal call must be ended.
The configuration can be carried out as follows:
• Via COMfortel Set
Configuring Function Key for Exchange Line Transfer via COMfortel Set
Requirements:
– An open configuration and the required PIN, if necessary
1.
Open the page Function keys > Assign function keys.
2.
Click one of the following tabs:
3.
Right-click the function key you want to assign.
A function selection dialogue opens.
4.
Select the Exchange line call transfer function.
The current settings for defining the key are displayed.
5.
In the Key name entry field, enter a name for the key. The following entries are
possible:
LED signalling next to the key:
None
Level 1: Keys are defined on the first key level.
Level 2: Keys are defined on the second key level.
Up to 16 digits
Digits and characters
Summary of Contents for COMfortel 1100
Page 273: ...04 11 10...