Auerswald COMfortel 1100 Operation And Configuration Instructions Download Page 146 | Manualshive

Page: 146 / 273

Auerswald COMfortel 1100 Operation And Configuration Instructions Download Page 146

146

COMfortel 1100 - Firmware Version 4.4 - COMfortel Set V2.7 - Version of the Manual 04 11/10

Configuring and Operating Functions
Do-not-disturb
Configuring and Operating Function Key for Do-not-disturb

Do-not-disturb

The do-not-disturb function offers the option of blocking internal and external calls as well as
blocking group calls on a specific telephone. A caller hears only a busy signal. An internal
subscriber can reach a telephone with call protection in an emergency using a priority call.

The do-not-disturb function has no influence on outbound calls, callbacks, alarm calls,
scheduled calls, wake-up calls or InterCom calls.

Configuring and Operating Function Key for Do-not-disturb

Press the key to switch the do-not-disturb function on or off or to switch it over.

In addition, when functions are defined on the first key level, the status of the function is
indicated by the corresponding LED.

The configuration can be carried out as follows:

• Via COMfortel Set

Configuring Function Key for Do-not-disturb via COMfortel Set

Requirements:
– An open configuration and the required PIN, if necessary

1.

Open the page Function keys > Assign function keys.

2.

Click one of the following tabs:

3.

Right-click the function key you want to assign.

LED signalling next to the key:

Yellow

The do-not-disturb function is enabled.

Off

The do-not-disturb function is disabled.

Level 1: Keys are defined on the first key level.

Level 2: Keys are defined on the second key level.

«
...
144
145
146
147
148
...
»

Summary of Contents for COMfortel 1100


















































































































































































































































































Reviews:

No comments