-
MANUAL
HTi
70
6 & 8 KW HEAT PUMPS
-
5
Type and refrigerant charge.
PS High: Max high service pressure
PS Low: Max low service pressure
2 -PLEASE READ
IMMEDIATLY
This technical installation manual forms part of the appliance which
it refers to. In order for the warranty to be valid, the instructions must
be read prior to using the appliance.
The safety advice and instructions provided in this manual must be
strictly respected.
Our society is not liable for any damages caused from not following
the instructions provided, or improper handling, installation or use.
This technical installation manual can be modifi ed without prior
notice.
This manual must be safeguarded and passed on to successive users
for future reference.
It will be considered as evidence in case of litigation.
2.1 - Conservation of documents
DHW ....... Domestic Hot Water
DCW ....... Domestic Cold Water
T° .............. Temperature
HP ............ Heat pump
2.3 - Abbreviations and acronyms
Indicates warnings and important recommendations.
2.2 - Symbols used
Contains regulated substances, do not throw in the
garbage. If disposing, please respect all regulations
pertaining to the recovery of electric and electronic
equipment.
Consult the installation manual before any intervention
on the product, before handling, installation, use , and
maintenance.
Heat power output produced.
Max current protection (A)
Caution : contains a fl ammable refrigerant fl uid.
Please make sure to respect the installation and
handling precautions.
3.2 - Storage and transport
Admissible storage and transport temperatures of the appliance
are between -20°C and +60°C.
The appliance must be stored in a room that does not contain
sources of ignition that are continuously operating (for example,
bare fi res, gas appliance or electric radiator in operation).
3.2.1 - General information
The appliances must be stored and transported packaged and
on their wooden pallets, in a vertical position, and completely
empty of water.
3.2.2 - Transporting with a forklift
When transporting with a forklift truck, the Heat Pump must be
on its wooden pallet.
When moving the Heat Pump do not lower or raise the unit
suddenly as the Heat Pump can easily lose it equilibrium. The Heat
Pump should be suitably secured to prevent it from tipping.
3.2.3 - Transporting manually
3.1 - Delivery terms and conditions
In general, the material is transported at the recipient’s own risk.
It is important to verify that all of the elements have been
received and that no damage has been sustained during
transport upon receipt of the appliance and before beginning the
installation procedures.
3 - DELIVERY AND
STORAGE
The Heat pump can be
transported manually.
The Heat pump must always
be transported in a horizontal
position, including during
installation.
Do not handlethe unit by its
hydraulic connections, but by
using the four straps.
Installation procedures must
be carried out by a qualifi ed
professional, so as to prevent
any risks of bodily harm and/
or material damage.
Do not incline
more than 30°
Maintain a protective covering on the fi nned
heat exchanger during handling.
1. Heat pump
2. Hydraulic connection kit
(inside the heat pump)
3. Hydraulic pilot
