auer 353420 Installation Manual Download

Page: 5 / 24

3.1 - Dimensions

3 - PRESENTATION

• 1 heat pump water heater
• 1 doumentation packet containing 1 installation and user

manual, and 1 warranty form.

2.3- Contents of packaging

2.5- Symbols used

Consult the installation

manual before all work

on the product: handling,

installation, use and

maintenance.

Contains controlled

substances, do not dispose

of in the garbage. In case of

disposal, please respect the

regulations for the recovery

of electrical and electronic

equipment.

Caution

: contains a

flammable refrigerant fluid.
Please make sure to

respect the installation and

handling precautions.

Keep the transport bag out of the reach of

children (risk of suffocation).

If tipped, the centre of gravity will shift

towards the top: handle with care.

• Remove plastic cover and cardboard packaging.
• Remove corner protection pieces, ensuring that all nails and

staples are taken out and disposed of.

• Remove protective film from all parts of the appliance and from

the bag of accessories which you will find in the transport bag.

• Without tilting the appliance, use the appropriate tool to remove

the screw from underneath the wooden pallet.

2.4 - Unpacking

Do not drop or lower suddenly

Risk of tipping

Once the heat pump water heater is

installed in its definitive position, it

is imperative to wait 15 minutes before it is

turned on.

3.1.1 - 200 L Heat pump water heater

3.1.2 - 270 L Heat pump water heater

installer

HEAT PUMP WATER HEATER 200 -270L AIR D/2 -

manual

installer

HEAT PUMP WATER HEATER 200 -270L AIR D/2 -

manual

Summary of Contents for 353420

























Search results

Summary of Contents for 353420

Reviews:

Related manuals for 353420

Brands by name

Popular brands

auer 353420, Installation Manual

Search results

Summary of Contents for 353420

Reviews:

Related manuals for 353420

Brands by name

Popular brands