7
USER'S MANUAL
3
2
1
4
1.
PRE OUT low-level analog signal (4 Volt RMS)
Ch1 - Ch2 - Ch3 - Ch4 - Ch5 - Ch6 - Ch7 - Ch8 - Ch9 - Ch10 - Ch11 - Ch12 - Ch13
To connect the RCA cables going to the system’s amplifiers.
2.
AD Link - OUT digital signal
S/PDIF standard digital signal (Ch1÷Ch13) to connect amplifiers provided with the specific AD Link input.
AD LINK 1:
S/PDIF standard digital signal (Ch1÷Ch8) to connect amplifiers provided with the specific AD Link input
AD LINK 2:
S/PDIF standard digital signal (Ch9÷Ch13) to connect amplifiers provided with the specific AD Link input
3.
AC Link:
Connection socket to control the amplifiers provided with AC Link connection
.
AC LINK 1:
Connection socket to control the amplifiers (Ch1÷Ch8) provided with AC Link connection.
AC LINK 2:
Connection socket to control the amplifiers (Ch9÷Ch13) provided with AC Link connection.
4.
RVA
(Remote Volume Aux): control signal output to connect to the master source AUX input, to enable the
“
AIS - Auto Input Switch
Remark:
the Remote Out signal is available on the AC LINK 1 / AC LINK 2 connection plugs and is active to the
amplifiers supporting this function (Audison AV amplifiers with AV bit IN input).
RCA / Jack
stereo Adapter
Included
4.2
OUTPUT SIGNALS
4500 mm / 177.17 in.
4
