Model : PRO-OE2
TRANSMITTER PROGRAMMING GUIDE
The transmitters included with the system have been pre-programmed
at the factory, with each button pre-assigned to control a specific function
of the system. Although the system in the vehicle has either a 2 or 3
channel receiver, depending on the model, the transmitters included with
the system are capable of transmitting 3 distinct signals. This allows you
to program each transmitter to more than one vehicle in two car families,
and also allows you to change which button(s) control certain functions
of the system.
( Example: Transmitter channel 3 can be programmed to activate
Receiver channel 2. ) Refer to the chart below for access to each of the
transmitter channels, and for the standard factory button assignments.
TRANSMITTER
SYSTEMRECEIVER
CHANNEL BUTTONS
CHANNEL
FUNCTION
1
LOCK
1
Remote Lock & Unlock
UNLOCK
& or **Remote Arm/Disarm
**Remote Emergency Panic
2
OPTION
2
* Pulsed Output for Accessories
3
LOCK
3
* Switched Output for Accessories
UNLOCK
* Second Vehicle Control
& OPTION
Some of the more common accessories for these additional
channels are;
*AS 9154
Remote Garage Door Interface
*AS 9075
Remote car starter
*AS 9153
Remote window roll up
*AS 9256
Remote trunk release relay
** Only Available With Some Systems
