34
5. INSTALLING PC5740
5.1 Precautions
1) Do not insert the PC5740 before installing the software in laptop
computer. When you complete the software installation, the system
will prompt you to insert the PC5740 into the Type II PC card slot.
2) Once the card has been inserted into the laptop, do not remove it from
your laptop without first completing the unplugging/ejection process.
(See page 36 for more information on this process.)
5.2 Recommended System Requirements
To successfully install and use the PC5740 card in your laptop, the following system
specifications are required.
* PC5740 is not designed for hand-held or Pocket PC. SMS or voice service is not
also supported.
* Windows 98 SE : You may need the original Microsoft Windows 98 installation CD.
Item
Operating system
Card slots
Processor
Disk drive
Memory
Disk space
Dial-up networking
Required Specification
Windows
®
98SE / Windows
®
Me / Windows
®
XP / Windows
®
2000
Type II PC Card slot (CardBus)
Pentium 150MHz or faster
CD-ROM
32 MB
14MB
DUN bound to TCP/IP
PC5740 User’s Manual
