This will cause VZAccess Manager to look for your wireless device(s) and verify
network availability. If you have any Wi-Fi networks you manually added because
they do not broadcast their SSID, they will always be displayed, and you will have
to refer to the signal strength displayed to know when you are in range. See the
section “Wi-Fi Specific Settings” for additional details.
* Note that with certain Wi-Fi adapters the signal strength for Wi-Fi networks is not
accurate until you connect to the network.
* The Quick 2 Net (14.4 kbps) connection is only created when the WWAN option is
selected during setup and if your wireless device supports it. The NationalAccess
connection is only created when the WWAN option is selected during setup and if
you are using a NationalAccess capable device that does not support the Verizon
Wireless BroadbandAccess service. If you are using a BroadbandAccess capable
device a NationalAccess - BroadbandAccess connection will be created. This
connection will use BroadbandAccess if available and will automatically attempt a
NationalAccess connection when BroadbandAccess is not available.
* If you change phones or PC Cards, you will need to run the Setup Wizard again.
To do this make sure that your phone and cable are connected, then select “Run
Wizard” from the “Options” menu.
13
PC5740 User’s Manual
