background image

 

AUDIOTRAK OPTOPlay User’s Guide 

 

- i- 

END

 

USER

 

WARRANTY 

EGO SYSTEMS, INC. warrants the return policy to its original purchaser as follows: All EGO 

SYSTEMS INC.’s products, under normal use, will be free from fault as long as the purchaser 
owns this product for a period of twelve (12) months from the date of purchase

EGO SYSTEMS INC. will, at its sole option, repair or replace a product, which is found to be 
defective. This warranty shall be invalid if, in the sole opinion of EGO SYSTEMS INC., a product 

failure is the result of misuse, abuse, modification, or misapplication. Except as expressly 

provided above, EGO SYSTEMS INC. products are provided, 'as is' without any kind of warranty. 
No claim is made for merchantability or fitness for any purpose. In no event will EGO SYSTEMS 

INC. be liable for any direct, indirect, consequential, or incidental damages arising out of use 
of the product. 

The purchaser must contact EGO SYSTEMS INC. or its regional representative to receive prior 
approval before returning a faulty unit. 

To obtain warranty service, the buyer or his authorized dealer must send an email to 

[email protected]

 before returning the product. EGO SYSTEMS INC. will then issue an 

authorization number. 

All such returns must be shipped to EGO SYSTEMS INC. headquarters in Seoul, Korea or the U.S, 

packaged in the original or equivalent protective packaging material (rack, PCI card, power 
cables, connection cables), with freight prepaid and adequate insurance. Any shipments 

without freight prepaid will not be accepted. If the returned product is deemed to be defective, 

the repaired or replacement product will be returned at no extra charge via the carrier chosen 

by EGO SYSTEMS INC. 

Trademarks

 

AUDIOTRAK and OPTOPlay are trademarks of EGO SYSTEMS Inc. Windows is a trademark of Microsoft Corporation. Other 
product and brand names are trademarks or registered trademarks of their respective companies. 

Radio Frequency Interference and COMPATIBILITY 

NOTE: This equipment has been tested and found to comply with the limits for EN55022 Class A:1998+A1:2001, 
EN55024:1998 of CE Test Specifications. This equipment generates, uses, and can radiate radio frequency energy. If not 

installed and used in accordance with the instruction, it may cause interference to radio communications. This device 
also complies with Part 15 of class A of the FCC Rules. Operation is subject to the following two conditions: This device 
may not cause harmful interference, and must accept any interference received, including interference that may cause 
undesired operation.  

Correspondence 

For technical support inquiries, contact your nearest dealer or EGO SYSTEMS directly at: 

 
Ego Systems Inc. 
3003N. First St., Suite 303, 
San Jose, CA 95134, USA 

Website: 

www.audiotrak.net

 

E-mail: [email protected] 
Technical Support (English only) 
[email protected] 

 

All features and specifications subject to change without notice.

Summary of Contents for AUDIOTRAK OPTOPlay














Reviews: