background image

Trademarks 
AUDIOTRAK and MIDI Mate are trademarks of Ego Systems Inc. Windows is a trademark of Microsoft Corporation. Other product and brand names are 
trademarks or registered trademarks of their respective companies. 

 
End User Warranty 
Ego Systems, Inc. warrants the return policy to its original purchaser as follows: All Ego Systems, Inc.’s products, under normal use, will be free from fault as 
long as the purchaser owns this product for a period of twelve(12) months from the date of purchase. 
 
Ego Systems, Inc. will, at its sole option, repair or replace a product, which is found to be defective. This warranty shall be invalid if, in the sole opinion of 

Ego Systems, Inc., a product failure is the result of misuse, abuse, modification, or misapplication. Except as expressly provided above, Ego Systems, Inc. 
products are provided 'as is' without any kind of warranty. No claim is made for merchantability or fitness for any purpose. In no event will Ego Systems, Inc. 
be liable for any direct, indirect, consequential, or incidental damages arising out of use of the product. 
 
The purchaser must contact Ego Systems, Inc. or its regional representative to receive prior approval before returning a faulty unit. To obtain warranty 

service, the buyer or his authorized dealer must fill the support contact form at 

http://audiotrak.net/support.htm

 before returning the product. Ego 

Systems, Inc. will then issue an authorization number.   
 
All such returns must be shipped to Ego Systems, Inc. headquarters in Seoul, KOREA(or U.S. office) with packaged in the original or equivalent protective 
packaging material (rack, PCI card, power cables, connector cables, and etc.) and with freight prepaid and adequate insurance. Any shipments without 
freight prepaid will not be accepted. If the returned product is deemed to be defective, the repaired or replacement product will be returned at no extra 

charge via the carrier chosen by Ego Systems, Inc. 
 
The FCC and CE Regulation Warning   
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions : (1) this device may not cause harmful 
interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Caution : Any changes 

or modifications in construction of this device with are not expressly approved by the party responsible for compliance, could void the user's authority to 
operate equipment.   
 
NOTE: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits 
are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment 
generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful 

interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be 
required to correct the interference at his/her own expense. If necessary, consult an experienced radio/television technician for additional suggestions. 

 
Correspondence 

For technical support inquiries, contact your nearest dealer, or Ego Systems, Inc. directly. 
 

Contact Info:   
AUDIOTRAK U.S. 

Suite 303 
3003 N. First Street 

San Jose, CA 95134   
USA 

 
AUDIOTRAK Headquarters 

ESI, Ego Systems Inc. 
Suite 1206, Woolim e-BIZ Center II 

16, Yangpyung-dong 3-ga, Youngdungpo-gu   
Seoul, KOREA 150-834   

 
Website: www.audiotrak.net    

Online Technical Support: http://audiotrak.net/support.htm 

 

All features and specifications are subject to change without notice. 

Summary of Contents for AUDIOTRAK MIDI Mate















Reviews: