Vanity
PRO
–
User Manual v1.2
Page 15 of 19
Audio Meters
For quick overview of the audio signals presence and incoming audio signal levels, the
Vanity
PRO
features an 8-channel audio level meter. Each channel has a dedicated meter with the
range from 0dBFS down to -48dBFs and tri-colour grade. The channel names are coded with
standard abbreviations. The additional names in the brackets follow the naming convention of the
CEA-861-D standard.
•
FL
–
Front Left
•
FR
–
Front Right
•
C
–
(Front) Center
•
LFE
–
Low Frequency Effect
•
SL
–
Surround (Rear) Left
•
SR
–
Surround (Rear) Right
•
SBL
–
Surround Back (Rear Center) Left
•
SBR
–
Surround Back (Rear Center) Right
Audio Meters screen and prototype showing the colour-grading of the meters
System Status
This screen shows the overall system status, health, and operational parameters.
POWER: Shows internal voltage measurements of various
voltage rails and Audio side power input current.
AUDIO: Shows various audio parameters which are available
in the home screen as well as oscillator selection, oscillator
control voltage and audio buffer utilization.
HW: Shows internal health checks for the key components
–
HDMI interface, FPGA, and the screen.
HDMI: Shows the ID information and status of the HDMI
interface.
PRODUCT: This section shows the product related information, such as serial number, hardware
version and firmware (SW) version. Information from this section should be always provided when
support is required.
Summary of Contents for VanityPRO
Page 1: ...VanityPRO User Manual...
