Continuous sealer
D541
Operation
21
5.4 Changing the operating settings
The following settings can be changed:
Setting
Value
Description
Heater
H.01
The heater is on when
the motor is running.
H.02
The heater is off when
the motor is running.
Maximum sealing tem-
perature.
L.10, L11, ..., L20
The maximum sealing
temperature to be set.
100 °C, 110 °C, ...,
200 °C
Blower
F.01
The blower is on when
the motor is running.
F.02
The blower is off when
the motor is running.
Temperature offset
S.-20 through S.20
The sealing-tempera-
ture regulation makes
use of a -20% through
+20% offset com-
pared to the sealing
temperature that has
been set.
Hour counter
Co
When the S
TART
/S
TOP
button is pressed down
during max. 1 second,
the number of hours of
operation are displayed.
If the number of hours is
higher than 3 digits, the
display will move 1 posi-
tion to the left every 0.5
seconds.
After 1 second, the dis-
play once again shows
Co.
