Pedal Editor
The pedal input(s) on the back of the
e
DRUM
in
supports a wide array of pedal types
including hihat controllers, expression pedals, sustain pedals, and footswitches.
You can open the pedal editor by clicking pedal input icon at the top of the UI.
Pedal Type and Pedal Sensing
The pedal input will perform different functions depending on
the type of pedal it is setup for. You can see that the hihat
pedal is currently selected in the image on the right.
In order for the pedal sensing to work properly, always connect the cable to your pedal
before connecting the cable to the
e
DRUM
in
.
Most pedals can be automatically detected and set up. Expression pedals and hihat
controllers will be configured as hihat controllers, while footswitches and sustain pedals
will be setup to perform bank changes.
Yamaha hihat controllers will initially be detected as footswitches, but will immediately
switch to a hihat controller when the hihat pedal is pressed.
Some hihat setups will not be properly detected. Here are specific instructions for the
and
based pedals.
e
DRUM
in
Manual
Page 29 of 49
Pedal Sensing On / Off
Current Pedal Type
Summary of Contents for eDRUMin
Page 1: ...USERMANUAL Version 2 0 ...
