AudioCodes RXV81, User'S And Administrator'S Manual, Page: 45 / 78

User's & Administrator's Manual 5. Configuring Device Settings
Version 1.18 45 RXV81 MTR on Android Video Collaboration Bar
5.1.3 Wi-Fi Settings
The RXV81 can connect to an Access Point via Wi-Fi.
Note: See the
Deployment Guide
for detailed information on how to set up Wi-Fi.

To configure Wi-Fi settings:
1. Under ‘Device admin settings’, navigate to and select Wi-Fi .
2. Navigate to and select Use Wi-Fi .
Configuring Wi-Fi
Network administrators can configure Wi-Fi parameters for the phone. The parameters are
concealed from the user's view. Use the following table as reference.
Table 5-1: Wi-Fi Parameters
Parameter Description
network/wifi_enabled Enables/disables the Wi-Fi feature.
network/wifi_pc_bridge Enables network connectivity for the PC behind the phone;
for debugging purposes.
network/wifi_ipv4_ method Defines the Dynamic or Static IP address for Wi-Fi.
network/wifi_channel_ mode
Enables the Wi-Fi channel mode:

2.4G only

5G only

2.4G+5G
The following table shows the parameters per index. The phone can currently store 16
connected SSIDs.
Table 5-2: Wi-Fi Parameters per Index
Parameter Description
network/wifi/[0-15]/ssid Saves the Access Point’s SSID.
network/wifi/[0- 15]/password Saves the password for some authentication methods which
need it, e.g., WPAPERSONAL, WPA2PERSONAL
network/wifi/[0- 15]/security Saves the Access Point’s authentication method: •
WPAPERSONAL • WPA2PERSONAL • WPAENTERPRISE •
WPA2ENTERPRISE
network/wifi/[0- 15]/auto_reconnect Configure this parameter to reconnect this SSID
automatically.