AudioCodes MP-26 series, User Manual

Page: 161 / 464

User's Manual 12. Network Connections
Version 4.4.0 161 MP26x/MP27x
7. If you selected the Manual PVC Settings option in the previous step, you also need to
configure the following:
•
VPI and VCI pair of identifiers.
•
Encapsulation method - LLC, VCMux, or VCMux HDLC.
Asynchronous Transfer Mode (ATM) is a network technology based on transferring
data in cells or packets of a fixed size. The cell used with ATM is relatively small
compared to units used with other technologies. The small, constant cell size allows
the transmission of video, audio, and computer data, assuring that no single type of
data consumes the connection. ATM addressing consists of two identifiers that identify
the virtual path (VPI) and the virtual connection (VCI). A virtual path consists of
multiple virtual channels to the same endpoint.
8. Click Next ; the 'Connection Summary' screen appears:
Figure 12-12: Connection Summary Screen
9. Select the 'Edit the Newly Created Connection' check box if you want to perform
additional configurations after clicking
Finish .
10. Click Finish to save the settings; the new PPPoA connection is added to the ‘Network
Connections’ screen.
12.1.1.4 Routed ETHoA or Bridged ETHoA
The Ethernet over ATM (ETHoA) connection allows transport of Ethernet frames on DSL
connections. When creating an ETHoA connection, it is bridged to the LAN. You must
configure a dialup connection on the LAN computer with your ITSP’s user name and
password.

To create an ETHoA connection:
1. In the 'Network Connections' screen, click the New icon; the 'Connection Wizard'
screen appears.
2. Select the Internet DSL Connection option, and then click Next ; the 'Internet DSL
Connection' screen appears.