AudioCodes mediapack MP-500 User Manual Download Page 439

Page: 439 / 574

Version 5.8

439

October 2009

SIP User's Manual

7. Default Settings

7 Default

Settings

You can restore the device's factory default settings or define your own user-defined default
settings for the device.

7.1

Restoring Factory Defaults

You can restore all or most of the device's configuration settings to default settings:

Restoring parameters to default settings, except for the device's IP address and
Web interface's login user name and password:

Load to the device an empty

ini

file

(without any parameters or only with a semicolon (;) preceding all lines). When a
parameter is absent from a loaded

ini

file, the default value is assigned to that

parameter (according to the

cmp

file loaded to the device) and saved to the non-

volatile memory (thereby, overriding the value previously defined for that parameter).

Restoring all parameters to default settings:

•

Press the device's hardware Reset button (refer to the device's

Installation

Manual for more information

•

Enter the CLI Shell command

RestoreFactorySettings

(from the folder

CONFiguration) in a CLI session with the device.

Summary of Contents for mediapack MP-500































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for mediapack MP-500

Reviews:

Related manuals for mediapack MP-500

Brands by name

Popular brands

AudioCodes mediapack MP-500, User Manual

Search results

Summary of Contents for mediapack MP-500

Reviews:

Related manuals for mediapack MP-500

Brands by name

Popular brands