AudioCodes mediapack MP-500, User Manual

Page: 37 / 574

Version 5.8 37 October 2009
SIP User's Manual 3. Web-Based Management
If you enter an invalid parameter value (e.g., not in the range of permitted values) and then
click
Submit , a message box appears notifying you of the invalid value. In addition, the
parameter value reverts to its previous value and is highlighted in red, as shown in the
figure below:
Figure 3-10: Value Reverts to Previous Valid Value
3.2.6.4 Entering Phone Numbers in Various Tables
Phone numbers or prefixes that you enter in various tables throughout the Web interface
such as the 'Tel to IP Routing' table, must only be entered as digits without any other
characters. For example, if you wish to enter the phone number 555-1212, it must be
entered as 5551212 without the hyphen (-). If the hyphen is entered, the entry is invalid.
3.2.6.5 Working with Tables
The Web interface includes many configuration pages that provide tables for configuring the
device. Some of these tables provide the following command buttons:
„ Add: adds an index entry to the table.
„ Duplicate: duplicates a selected, existing index entry.
„ Compact: organizes the index entries in ascending, consecutive order.
„ Delete: deletes a selected index entry.
„ Apply: saves the configuration.