AudioCodes mediapack MP-500 User Manual Download Page 276

Page: 276 / 574

SIP User's Manual

276

Document #: LTRT-12801

MP-500

MSBG

4.3

Modifying an ini File

You can modify an

ini

file currently used by the device. Modifying an

ini

file instead of

loading an entirely new

ini

file preserves the device's current configuration, including

factory default values.

To modify an

ini

file:

Save the current

ini

file loaded on the device to your PC, using the Web interface (refer

to ''Backing Up and Restoring Configuration'' on page

244

Open the

ini

file (using a text file editor such as Microsoft Notepad), and then modify

the

ini

file parameters according to your requirements.

Save the modified

ini

file, and then close the file.

Load the modified

ini

file to the device, using the Web interface (refer to ''Backing Up

and Restoring Configuration'' on page

244

Tip:

Before loading the

ini

file to the device, verify that the file extension of the

ini

file is correct, i.e.,

*.ini

Summary of Contents for mediapack MP-500































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for mediapack MP-500

Reviews:

Related manuals for mediapack MP-500

Brands by name

Popular brands

AudioCodes mediapack MP-500, User Manual

Search results

Summary of Contents for mediapack MP-500

Reviews:

Related manuals for mediapack MP-500

Brands by name

Popular brands