AudioCodes mediapack MP-500 User Manual Download Page 234

Page: 234 / 574

SIP User's Manual

234

Document #: LTRT-12801

MP-500

MSBG

3.5.1.2 Configuring the Regional Settings

The 'Regional Settings' page allows you to define and view the device's internal date and
time.

To configure the device's date and time:

Open the 'Regional Settings' page (

Management

tab >

Management Configuration

menu >

Regional Settings

page item).

Figure

3-183: Regional Settings Page

Enter the current date and time in the geographical location in which the device is
installed.

Click the

Submit

button; the date and time are automatically updated.

Notes:

•

If the device is configured to obtain the date and time from an SNTP
server (refer to ''Configuring the Application Settings'' on page

), the

fields on this page are read-only and cannot be modified.

•

For an explanation on SNTP, refer to ''Simple Network Time Protocol
Support'' on page

545

•

After performing a hardware reset, the date and time are returned to their
defaults and therefore, should be updated.

3.5.1.3 Maintenance Actions

The 'Maintenance Actions' page allows you to perform the following operations:

Reset the device (refer to ''Resetting the Device'' on page

235

)

Lock and unlock the device (refer to ''Locking and Unlocking the Device'' on page

236

)

Save the configuration to the device's flash memory (refer to ''Saving Configuration'' on
page

237

)

Summary of Contents for mediapack MP-500































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for mediapack MP-500

Reviews:

Related manuals for mediapack MP-500

Brands by name

Popular brands

AudioCodes mediapack MP-500, User Manual

Search results

Summary of Contents for mediapack MP-500

Reviews:

Related manuals for mediapack MP-500

Brands by name

Popular brands