Version 5.8
207
October 2009
SIP User's Manual
3. Web-Based Management
2.
From the 'Routing Index' drop-down list, select the range of entries that you want to
add.
3.
Configure the table according to the table below.
4.
Click the
Submit
button to save your changes.
5.
To save the changes so they are available after a power failure, refer to ''Saving
Configuration'' on page
Table
3-27: IP to Hunt Group Routing Table Description
Parameter
Description
IP to Tel Routing Mode
[RouteModeIP2Tel]
Determines whether to route IP calls to the Hunt Group before or
after manipulation of destination number (configured in ''Configuring
the Number Manipulation Tables'' on page
).
[0]
Route calls before manipulation = IP-to-Tel calls are routed
before the number manipulation rules are applied (default).
[1]
Route calls after manipulation = IP-to-Tel calls are routed
after the number manipulation rules are applied.
Dest. Host Prefix
[PstnPrefix_DestHostPrefix]
The request URI host name prefix of the incoming SIP INVITE
message. If this routing rule is not required, leave the field empty.
Note:
For notations representing multiple numbers, refer to ''Dialing
Plan Notation for Routing and Manipulation'' on page
. However,
the asterisk (*) wildcard cannot be used to depict any source host
prefix.
Source Host Prefix
[PstnPrefix_SrcHostPrefix]
The From URI host name prefix of the incoming SIP INVITE
message. If this routing rule is not required, leave the field empty..
Notes:
For notations representing multiple numbers, refer to ''Dialing
Plan Notation for Routing and Manipulation'' on page
However, the asterisk (*) wildcard cannot be used to depict any
source host prefix.
If the P-asserted-ID header is present in the incoming INVITE
message, then the parameter 'Source Host Prefix' is compared to
the P-Asserted-ID URI hostname and not to the From header.
Dest. Phone Prefix
[PstnPrefix_DestPrefix]
Represents a called telephone number prefix.
The prefix can be 1 to 49 digits long.
Note:
For notations representing multiple numbers, refer to ''Dialing
Plan Notation for Routing and Manipulation'' on page
Source Phone Prefix
[PstnPrefix_SourcePrefix]
Represents a calling telephone number prefix.
The prefix can be 1 to 49 digits long.
Note:
For notations representing multiple numbers, refer to ''Dialing
Plan Notation for Routing and Manipulation'' on page
Source IP Address
[PstnPrefix_SourceAddress]
The source IP address of an IP-to-Tel call (obtained from the
Contact header in the INVITE message) that can be used for routing
decisions.
Notes:
You can configure from where the source IP address is obtained,
using the parameter SourceIPAddressInput (refer to ''Routing
General Parameters'' on page
Summary of Contents for mediapack MP-500
